Mazda SKYACTIV Genuine Oil ATF - FZ Automatic Transmission Fluid ( 1 Liter )

Mazda SKYACTIV Genuine Oil ATF-FZ Automatic Transmission Fluid (1 Liter)

Only use "ATF-FZ" to fill or top off the fluid level.

ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT.

It is a low viscosity formula with less friction for better fuel economy.

NOTE: ATF-FZ is colored blue for easy identification.

To check the fluid level, remove the bolt, then remove the dipstick.

The dipstick is marked with a “FZ” on SKYACTIV-DRIVE FW6A-EL AT.

When finished, insert the dipstick and install the bolt.

Tightening torque: 8-10 N·m (82-101 kgf·cm, 71-88 in·lbf)

[The dipstick is marked with a “FZ”](https://mazda.oemdtc.com/product/k-B00P2P3HCQ/US/mazdaoemdtc-20)

The fluid level should be between the “L” and the “F” when the ATF is warm (at least 50 °C (122 °F)).

[fluid level should be between the “L” and the “F” when the ATF is warm (at least 50 °C (122 °F)](https://mazda.oemdtc.com/product/k-B00P2P3HCQ/US/mazdaoemdtc-20)

SKYACTIV-DRIVE FW6A-EL AT with “ATF-FZ” is “filled for life” (no change intervals for ATF required) and flushing is not recommended as part of service maintenance. There are no oil cooler lines and the replacement SKYACTIV-DRIVE FW6A-EL AT will come with a new oil cooler, which is mounted directly to the case. If repair or AT replacement is necessary, use only “ATF-FZ” to fill the AT.

2003-12: Mazda 3, Mazda6 with 4 or 5 speed
2006-2012: Mazda5, CX-7, CX-9 with 5-speed Transmissions
2011-2012: Mazda 2